Water Feature Containers

We stock a wide variety of suitable containers for your water feature, some suitable for free standing use and others for placing into the ground.

Pebble Pools

Comprising of a wide brimmed reservoir and separate reservoir cover, these lightweight plastic containers are designed to be installed in the ground with the brim / ledge fully supported by the ground. A small pump can be placed inside the reservoir and a stem or pipe connected to the outlet of the pump which is fed up through the centre hole of the cover which is placed over the centre of the container. A simple fountain jet or small drilled stone or other light water feature (amphora, copper cascade etc.) is connected to the top of the pipe and the rest of the container brim / ledge is dressed over with stones, cobbles or other suitable rock. Two sizes are available:-

Patio Pools

A very strong plastic tray with three planting pockets are features of this simple system. The tray is rested on top of the reservoir and the entire system can be buried in the ground or is strong enough to be self supporting above ground. Three colours are available :- Terracotta, Ivory & Dark Brown.

Terrace Ponds

These wooden clad hexagonal "Ponds" are available in D.I.Y. form and comprise a set of six wooden sections and a black insert tub. Two sizes are available  

Terrace Pond Inserts only

Available in two sizes, these polypropylene tubs are flat based and virtually straight sided (tapering only slightly from the top to the base

Small Terrace Pond Insert 

Internal diameter of top 80cm External diameter of top 87cm    Height / Depth of container 31cm

Large Terrace Pond Insert 

Internal diameter of top     External diameter of top Height / Depth of container

Facet Ponds

A soft wood frame with a choice of zinc or wooden slatted sides and completed with a flexi liner. The wood is supplied untreated and requires a stain or varnish.

Dimensions : All Facet ponds are 42cm high

Facet 200 80cm Hexagonal

Facet 250 87cm Square

Facet 320 87cm x 112cm Rectangle

Square Stock Ponds

Round Stock Ponds

Reflection Ponds

New......New......New......New......New......New......New......New......New......

Finia Reservoirs

This innovative design will support a significant weight of water feature due to the strength offered by the three platforms meeting close together in the centre of the reservoir. With a capacity of 70 litres and made from 100% recycled plastic, this self supporting container is supplied complete with shaped & perforated cover to allow drainage of the water back down into the reservoir (where the pump is situated)

Dawn Water Feature Container

Constructed from heavy concrete, this shaped container is a very decorative addition to any patio. The pump cable can be discreetly passed through the side of the reservoir and then sealed into place with silicone sealer.

Feature Support Grids

Our range of grids for water feature use is extensive also:-

Feature Grids

Made from strong metal hoops, the feature grid range comprises three sizes, FG1 (40cm diameter), FG2 (50cm diameter) & FG3 (60cm diameter). Models FG2 & FG3 have removable centre sections. Barrel hooks to allow fixing inside of a wooden barrel are also available in sets of 4 hooks.

Specialist Grids

Larger than the Feature Grids, these plastic coated metal grids are currently available in 3 circular and 1 square option. With a mesh size of 2cm, the grid will support a covering of quite small stones although a sheet of fine plastic mesh overlaid onto the grid will be required if gravel or decorative stone chippings are to be used. There is a central hole for the water hose feed to the feature and an access hatch 25cm x 20cm for ease of maintenance of the pump, the hinged hatch cover is detachable and measures 35cm x 30cm.

Plastic Rectangular Grids

Designed originally as a pond filter media support grid, these plastic meshed rectangular sheets are suitable for light water features only. They can easily be cut to fit any container. Size 68cm x 40cm with a mesh size of 17mm.